One of the beauties of living is that we can continually reinvent ourselves and our surroundings to better reflect who and what we are in that moment.

They say a change is as good as a holiday, right?

I was bored of my couch cushions and looking for an update. I found I need not look further then my cupboard. Inside was an old torn sarong, gifted by a past lover. The affair was fleeting but the sarong has been hanging around for almost 12 years. Its purples and blues have faded beautifully, and the texture so soft and perfect for resting a weary head.

I wrapped an existing cushion and was pleased with the way it perched on my couch, oh so hip. For the next couple of weeks I continued to wrap the cushion, remaking the couch daily and also adjusting other various throws and pillows, all of which my husband would swipe into the corner nightly as he settled in for some TV time.

This would not do. I was tired of picking up and re-wrapping cushions. This sarong needed to become the cushion cover it was pretending to be, for real.

So this is the busy mamas guide to whipping up a slap-dash cushion cover that looks super cool like it cost at least $89.95.

You need:

A cushion you would like to recover. If you don’t have one try an op-shop, or inserts can be purchased from fabric and ‘haberdashery’ stores.

Fabric: Use anything that is cushion appropriate as long as you have enough fabric to cover it, like your baby’s clothes that no longer fit, an old dress, anything beautiful that catches your eye. You know what you want in your home, seek it out.

Sewing pins, sewing scissors, a sewing machine, thread.

A zip that is slightly smaller then one side of the cushion. You may need to measure this with a ruler or measuring tape.

Instructions:

Remove current cushion cover.

Pin cover to fabric.

Cut a around three edges of the cushion cover leaving about an inch (2.5cm) leeway for hemming. No need for measurements here, you have eyes after all.

This is the hard part: You need to unpin the cushion cover and then flip it over ON THE SIDE THAT YOU HAVE NOT YET CUT. Don’t bother about the inch hem allowance for the edge you have just flipped over, because you don’t need it.

Pin the cushion cover down again, and cut around the other three edges, leaving the inch allowance for the hem on these outer edges.

You should now have a rectangular cutting that is twice the length of the cushion cover.

Decide which side is the ‘right' side meaning the side that needs to be on the outside of the finished product, and then fold the fabric so the right sides are facing each other. To repeat that again, face the right sides inwards.

Pin two edges together, and sew them, Use up most of your inch for the hem, but not the full inch. I’ll let you be the judge.

Stitch down the sides again for a doubly strong cushion (if you care for such formalities, If you’re too busy, bah).

Ok this is where we attach the zip. You will have one side of the cushion that is completely open. Turn down each raw edge 1cm, pin and and sew. This will make it look nice and neat when you attach the zip.

Unzip the zip, and pin one side of the zip to one of the edges, taking care to place the zip exactly where you would like your zip to be.

Use the zip foot of your sewing machine. Sew that side of the zip that is pinned. Good Ok, now you need to pin the other side of the zip, When you pin, pin from the base of the zip to ensure the zip is flat once you have finished sewing. If you pin from the top of the zip your cushion zipper could get a bit bunched up and bubbly.

With the cushion inside out, make sure all edges are finished up, snip away excess threads, turn out the right way, insert your insert, close your zipper and viola! Throw it on the couch and admire your good work.